How to Oil Hair Clippers
Going to the barbershop is a classic way for men to relax and enjoy each other’s company. It’s also an essential part of grooming! You don’t have to go to the salon or spa every time you want to get your hair trimmed.
With barber prices starting at just $10, you can get an excellent cut without breaking the bank.
Hair clippers are used to cut and trim hair. These devices work best on long tresses, but you can also cut stubble, beard, or goatee. They are compact and easy to use as well. If you have decided to buy a hair clipper at the local market, you would want to know how to oil hair clippers. Oiling your device helps it last longer, giving you the expected service that you require from it. Learn how easy it is to oil hair clippers at home!
Hair Clippers 101
The two main types of hair clippers available are trimmers and clippers. Both have their uses, and both can give you a great haircut. You’ll learn all about these different types of hair clippers, as well as how to maintain them. Let’s check each type in more detail:
These are used for cutting short, stubble hair. You can use them for shaving facial hair or even the hair on your legs. The blades are very sharp, and hence it’s advised to use a good lubricant before using them.
Nose Hair Trimmers: These trimmers have an attachment for trimming the hair in your nose.
Beard Trimmers – These are meant to be used for beard and mustache trimming. They come with various length settings to choose from.
Hair clippers have longer blades than a trimmer, and you can use them to cut the hair of any length. They are best suited for trimming beards and heads of hair, as well as necks and shoulders.
Beard Combs: Beard combs help keep your beard tidy by separating the hairs to ensure neat lines.
How to oil hair clippers
Cleaning your hair clippers is a lot easier than you might think. The key to maintaining your own set of clippers is to make sure that you take care of them. You’ll want to clean and oil them after every use, just like any other machine. It’ll ensure that they last longer and run better the next time you need them. To do this, you’ll need a few basic supplies:
Clipper cleaning brush: This is the first thing that you’ll need. It’s essential to use this brush to clean the clippers after every use. That’ll help prevent any hair from getting stuck in the blades, making them harder to clean later. You can find these brushes at most local stores or online retailers for a few dollars.
Clipper Oil: Another thing that you should always have on hand is clipper oil. It’s essential to use this oil every time you clean your clippers, keeping them in good working order. It also protects the metallic parts from rust. You can also use this oil to lubricate the blades and help keep them from getting too hot when using them.
Good clipper oil is vital if you want your clippers to last for a long time. You should only use high-quality clipper oil on your equipment as well. There are several brands of clipper oil that you can choose from. Also, you can use them on your cordless clippers as well as your corded ones. It’ll keep them running smoothly for a long time, which is crucial if you want to do a good job cutting hair.
Oiling the motor
The motor of your clippers is also essential. It’d help if you kept it well-oiled not to break down quickly. The problem with most clippers is that they have many moving parts, which means they are prone to get stuck or broken if you don’t maintain them properly.
One of the tips you need to keep your clippers in good condition is to use a lightweight machine oil. You can find it at any hardware store, and it’ll help you get rid of any friction that might be occurring between the parts of your motor.
However, make sure that you’re not overdoing it when using this oil. You need a small amount to not get into the moving parts and cause them to stick together.
Lubricating the Motor Housing
Please turn on your hair clippers and run them for a few seconds. Then turn off the clippers and remove the motor housing. Wipe off any excess hair inside the motor housing with a dry cloth or paper towel. Apply a few drops of lubricant to each blade by rubbing it onto the blade with your fingers. Then wipe off any excess oil with a dry cloth or paper towel. Replace the motor housing and turn on your hair clippers. Run them for a few seconds to lubricate the motor housing, then turn off the clippers.
Cleaning the blades
It’d help if you cleaned the hair clipper blades before oiling them. The quickest method to do this is to use a cleaning brush. However, you can also do it manually. First, remove the hair clipper blades from the motor and wash them with warm water and soap. Then, it would help if you dried them using a soft cloth or towel.
If you have removed the hair clipper blades from the motor, you need to clean the teeth of each blade separately using a cleaning brush.
Oiling the blade and comb
The next step is to oil the blades. It’ll help them run smoothly and reduce wear and tear. I recommend using a quality machine oil or sewing machine oil available at any hardware store. You can also try a natural oil like olive oil or coconut oil, but make sure it is odorless and contains no harmful chemicals.
You can apply the lubricant with a toothpick, cotton swab, or similar. If you have some leftover oil from previous blades, you can re-use it on the new blades.
Pour about two drops of oil on the teeth of each blade. Be careful not to use too much oil, or the blades will become slippery and slip while cutting hair.
If you are using a machine oil, wipe off any excess oil with a soft cloth or towel before reassembling the hair clipper.
Lubricating the Blade Guards
Remove the blade guards from your hair clippers. Wipe off any excess hair from inside each blade guard with a dry cloth or paper towel. Drip a few drops of oil to each blade by rubbing it onto the blade with your fingers.
Replacing the Blade Guards
Place each blade guard back onto your hair clippers and ensure they are secure. Make sure you put the guards on in the correct order so that when you are cutting hair with your clippers, you don’t accidentally cut yourself with a blade. To ensure that your clippers are always in good working order, you should regularly clean them. You can do this by removing the blade guards and running the clippers for a few minutes to blow away any dust or hair.
After you have cleaned your clippers, replace the blade guards. Make sure they are on correctly so that you don’t accidentally cut yourself while using them. If you want to store your clippers, remove the blade guards and then place them back
Common problems with hair clippers and how to fix them
Although oiling hair clipper keeps many problems at bay, you may encounter other problems once in a while. The common challenges include damaged blades, broken electric cord, faulty recharger, and faulty motor.
In most cases, you need to replace the broken parts. If the motor is clogged, all you need is to unclog and clean it.
If your clippers are not shaving, you need to check if the screws are tight. Loose screws make the blades slide past each other without cutting your hair. Also, tight screws will prevent the blades from sliding due to compressive force. Use a screwdriver to tighten or loosen the screws. Ensure the blades are aligned to avoid nipping your skin.
After using your clipper for some time, the blades may become blunt. In that case, you’ll need to take the blades to a specialist for sharpening. If you use the clippers for commercial purposes, you can always have spare blades as the specialist sharpens the blunt pair.
Your clippers may cut out during shaving. That indicates a problem with the lead – You can prevent this by checking the lead for fractures and splits. You’ll need to replace the lead once it gets damaged.
Noisy clippers are a sign of loose screws. It can happen to a new or an old clipper. The user’s manual advises tightening the screws depending on the brand and model.
Oiling a hair clipper prolongs its life. Ensure you clean and oil them after every use. Also, ensure you clean them before every use. Over-oiling the clippers can cause the blades to slide past each other. Therefore, you’ll need to wipe off excess oil before use. Excess oil on the motor causes clogging. Thus, apply oil moderately. Constantly check all the parts of your hair clipper and replace any faulty part instantly.